Thursday, June 14, 2018

Tools, tools, more tools

Since I am just starting my initial thoughts are to acquire tools as you need them. In watchmaking however that happens incredibly fast unless you are only cleaning a watch and putting it back together. For instance, the watch I am working on has two major issues; the regulator is missing and the balance assembly needs work (a new staff because of broken pivots and a broken roller jewel).  To tackle the balance staff for an antique watch there are two options; buy a new one if you can find it or make one from scratch. Finding NOS parts is tough on many models and the idea of a parts watch seems counter-intuitive (I thought I was fixing a watch...?). So making a balance staff it is.
    First, you need a lathe (with whatever it takes to power it correctly) and stock material. You will need the appropriate collet for that lathe to hold said stock. Are you doing it by hand? You will need gravers and a method for holding them at the right angle to shape them and a sharpening stone and oil if you don't have it. Not cutting by hand, you will still need to make a cutting tool (assuming you can file it out with a hand file) and a cross-slide for the lathe. You will at least need a caliper and preferably a micrometer to measure for the replacement. You will need a staking tool with a balance removal tool and the appropriate stake/stump to remove the roller table. Alright, let us assume you got all of that and are ready to put it all back together. By the way, did you screw up the hairspring getting it off?
  You will need to put the roller table and balance on the new staff with the staking tool. You now need to make sure the new setup is itself balanced with a poising tool and make sure the pivots are polished with, of course, a pivot polishing tool. Now just clean it, install it, oil it and adjust it and bobs your uncle, it's done. You have probably turned an 11 dollar watch movement into a 40 dollar watch movement and you only spent around $1000.

No comments:

Post a Comment