Thursday, June 14, 2018

Tools, tools, more tools

Since I am just starting my initial thoughts are to acquire tools as you need them. In watchmaking however that happens incredibly fast unless you are only cleaning a watch and putting it back together. For instance, the watch I am working on has two major issues; the regulator is missing and the balance assembly needs work (a new staff because of broken pivots and a broken roller jewel).  To tackle the balance staff for an antique watch there are two options; buy a new one if you can find it or make one from scratch. Finding NOS parts is tough on many models and the idea of a parts watch seems counter-intuitive (I thought I was fixing a watch...?). So making a balance staff it is.
    First, you need a lathe (with whatever it takes to power it correctly) and stock material. You will need the appropriate collet for that lathe to hold said stock. Are you doing it by hand? You will need gravers and a method for holding them at the right angle to shape them and a sharpening stone and oil if you don't have it. Not cutting by hand, you will still need to make a cutting tool (assuming you can file it out with a hand file) and a cross-slide for the lathe. You will at least need a caliper and preferably a micrometer to measure for the replacement. You will need a staking tool with a balance removal tool and the appropriate stake/stump to remove the roller table. Alright, let us assume you got all of that and are ready to put it all back together. By the way, did you screw up the hairspring getting it off?
  You will need to put the roller table and balance on the new staff with the staking tool. You now need to make sure the new setup is itself balanced with a poising tool and make sure the pivots are polished with, of course, a pivot polishing tool. Now just clean it, install it, oil it and adjust it and bobs your uncle, it's done. You have probably turned an 11 dollar watch movement into a 40 dollar watch movement and you only spent around $1000.

Wednesday, June 6, 2018

Journey to the unknown...



Tonight I continued my disassembly learning and made it down to the parts I did not know, those related the winding and setting. Moving the lever back and forth I can see that escapement is powered by the main spring so it is really only the balance/staff which is failing to get the watch ticking.
My goal really isn't to repair the watch but it is certainly worth learning to do as soon as possible. I also took count of the teeth on the main train wheels/pinions to do the math for practice and confirm what I already know that this is an 18k bph watch.

Tuesday, June 5, 2018

First Day Reflection

So I began tackling the disassembly of the Elgin. Once removed from the case I went to unscrew the dial screws and one was broken allowing the face and the other two to come out on their own. I went on to remove the balance cock and train bridge, balance and escape lever. Looking at the balance I can see this watches major issue (there are at least a few). The balance staff is broken as is the roller jewel. This means the balance wobbles all over the place and there is no way for this watch to run. In addition, putting a few turns on the mainspring there is no movement which I am guessing is something gummed up in the barrel. I put it all back together and called it a night.

Reflections on the first day - I bought cheap screwdrivers and figured "oh I can make the loupe work as it is. I was wrong on both of these. Lessons learned. Cheap screwdrivers are not ground properly out of the box. Also, lighting is no joke; there simply can not be enough light. Cheap movement holder means ill fitting. This stuff will work for now but I will be replacing it all as soon as possible. Now for some deep thoughts...


Watchmaking is a puzzle. The rules (while initially intimidating) are definable as well as victory. Learning the basics of watchmaking is much like learning the rules to a game; a bit dry though interesting. It is once these rules are learned that the real fun is to be had. Learning where the rules can be bent or finding interesting ways to solve the problem become the source for creativity and individualism.

A beater to be sure

This watch is just a parts watch and DOA but will work for my current needs of something complete to take apart. It has suffered from much abuse with several dents on the case center, a missing crystal and back.


The front bezel and back are of the screw on type (evident from the threaded part on the back). These dents however keep the front bezel from turning easily. As the case is missing nearly all parts and isn't needed, I decided to cut it off. This involved a hacksaw at an angle being careful not to actually go into the movement.

That done, the watch is ready for disassembly.



Getting up and running...


So I have begun my journey in watchmaking. My interest are not in repair work per se. I want to be able to create watches from brass and steel. I am learning that is going to require a lot of tooling (read $$$) but I will start slowly and build up as my skills demand. I am currently reading and re-reading Harold C. Kelly's A Practical Course in Horology from 1944 available here. Using basic tools, I intend to start taking a few watch movements apart and putting them back together ad nauseam until I have learned what everything is, what it does, and how it works. While doing this I plan to get my new old WW lathe together and spinning at a good speed for hand turning (about all I can do with a simple rest and a barebones tailstock. I will be starting with this 1912 Elgin Grade 344. For you that aren't familiar with Elgins they all have a Grade which is essentially the model number (they also have model numbers but that's a bit more confusing). Anyways a watch with the same Grade number is nearly identical to its brothers (or sisters? are watches like ships?). Roll up your sleeves and join me!